Lite · one assembled print-in-place 3MF · hinge release unverified

Beer Protector Lite Generator

Lite V9 prints the lid and ring together, already joined by a captive hinge, unfolded at 180° on a single build plate. Customize the logo, inside QR/text and up to four AMS colors. No additional test modes or manual snap assembly. Hinge release and liquid sealing are not yet physically verified.

View the original deep-cover generator

One assembled print-in-place model

The lid and grip ring export as one grouped 3MF object on one plate, fully open at 180° with the printed hinge pins already inside the bearing sockets. Customize your logo, QR, text and four AMS filament colors below. No assembly after printing.

0.10 mm layers for fine artwork. Includes the P2S profile.

Unofficial GTA VI four-color demo is loaded. Upload your own SVG/PNG/JPG/WebP to replace it.

Currently a direct link. Editable short URLs will be enabled after the redirect service is built and secured.

No gasket or insert: Lite keeps the narrow integral PLA-to-can contact band (Ø51.4–54.6 mm, 0.55 mm above the inner roof). Contact and lid retention must be verified on a real can; not guaranteed spillproof or CO₂-tight.

Snap ring nominal inner diameter 50.0 mm · rolled cap diameter 57.8 mm (inside 55.6 mm) · QR module 0.8 mm · integrated captive hinge without outer arms (Ø2.95 mm pins, 0.45 mm radial bore clearance).P2S · 0.2 mm nozzle · PLA · 0.10 mm layers (first: 0.12 mm). One assembled 3MF object on one plate: logo colors first, interior QR/text later. Supports OFF. Do not split or rearrange the assembly. Print at 100% scale. Lite V9: flat 180° print-in-place assembly, hinge Z4.1 mm, no external squeeze arms or PUSH. The ring and lid rest on the same plate, and the pins must remain captured in the hinge bores. Supports disabled. Physically test the hinge release.

Live 3D geometry preview

High-contrast lettering on the inside. Leave blank to hide. Maximum 32 characters.

AMS filament palette (4 colors)

The grip ring and lid always print in the same body color. The dark filament is reserved for logo outlines, the QR and lettering.

GTA VI demo: yellow cap + black outlines + white text/QR + pink VI. Four solid AMS filaments; no gradients.

Source logo color → AMS filament

2 mechanical piecesUp to 4 AMS colors · 1 plate · connected hingeP2S · 0.2 mm nozzleQR 37×37 · 29.6 mm

The 3D preview uses the same CAD meshes as the 3MF export. Open/closed assembly is simulated; physical hinge fit still needs verification after printing.