Create a custom 3D keychain

Design a personalized 3D-printable keychain with your logo and a scannable QR code. Add an optional NFC pocket, then download a color-ready 3MF model for Bambu Lab printing.

Configure Your Tag

logo-print.svg

Filled paths only — convert strokes and text to outlines first. The artwork is scaled to fit inside the raised rim.

100% fills the safe artwork area. Fine details need at least 0.8 mm width for a 0.4 mm nozzle.

Remove isolated logo details and holes narrower than 0.8 mm. Connected thin strokes still need a thicker source SVG.

Circular internal pocket for a 25 mm NFC sticker (25.4 mm diameter with fitting clearance, 1.0 mm deep). Select this and regenerate the model before downloading the 3MF.

Print QR-side down. In Bambu Studio, verify the NFC pocket appears as a negative part in sliced preview. Pause just before the pocket closes (around 1.8 mm height), glue the chip securely inside, then resume printing. The chip must be no thicker than 1.0 mm.

▼Tag settings
DiameterAuto mmNFC pocketØ25.4 × 1 mmArtwork area⌀30.4 mmQR areaAuto × Auto mm

3D Preview

Your generated model will appear here.

3D preview · colored by part · ready for Bambu Studio

How it works

  1. 1
    Prepare your image
    Take the logo or image you need in PNG format.
  2. 2
    Convert it to SVG
    Convert your PNG to an SVG file: convertio.co/png-svg/
  3. 3
    Upload and generate
    Upload the SVG here, choose your colors and generate the model.